up:
Installing grml on the EEE PC

  1. Warning: Your current EEE installation will be erased.

  2. Plug in the USB stick, press ESC while booting the EEE PC and select it.

  3. Get into a shell and run cfdisk /dev/hdc. Partition your disk, I just made one big Linux partition.

  4. Run grml2hd, select /dev/hdc1 as target disk.

  5. Install the bootloader to /dev/hdc.

  6. Format as ext3 (or ext2 if you are paranoid about your SSD. However, I don't buy it).

  7. Configure the boot parameters to include hdc=noprobe hdc=none. The SSD will be very slow else!

  8. Use grub.

  9. Reboot into your fresh grml.